Need help?Do you have a question about the Wolf DD30 and is the answer not in the manual?
General| Color | stainless steel |
|---|---|
| Venting Type | ducted |
| Blower Type | sold separately |
| Number of Fan Speeds | 3-speed blower control |
| CFM | 1, 200 cfm |
| Duct Size | (i) models 3 1/4" x 10"; (r) models 3 1/4" x 14" |
| Electrical Requirements | 110/120 v ac, 60 hz, 15 amp dedicated circuit |
| Voltage | 120 volts |
| Current | 15 |
Weight and Dimensions| Depth | 2 3/8 inch |
|---|---|
| Height | 9 1/16 inch |
| Width | 30 inch |
Details the location of the product rating plate for model and serial number identification.
Lists essential safety precautions for installation, including electrical work, ventilation, and utility protection.
Specifies countertop depth, trim kit needs, remote control module placement, and HVAC consultation.
Details ductwork requirements, including material type, efficiency considerations, and length limitations.
Outlines compatible blower types (internal, in-line, remote) and their specifications, including CFM and discharge size.
Details electrical supply, service, receptacle, and power cord specifications for the appliance.
Explains the importance of proper grounding, including warnings against improper installation and extension cord use.
Provides diagrams and measurements for downdraft cutout widths for standard installed cooktops.
Presents diagrams and dimensions for downdraft cutouts when installing with a flush cooktop.
Shows installation diagrams and cutout widths for downdrafts used with sealed burner rangetops.
Details installing top and bottom mounting brackets for the downdraft unit, including screw types and adjustments.
Explains how to manage blower transitions for internal, in-line, and remote blowers based on discharge configuration.
Provides step-by-step instructions for mounting internal blowers, including discharge orientation and securing the unit.
Guides on connecting electrical supply for in-line and remote blowers, specifying wire connections and strain relief.
Details securing the downdraft to the countertop and cabinet base using provided brackets and screws.
Instructions for installing the control module, including template use, hole drilling, securing, and wiring.
Covers connecting the power cord, verifying operation, and installing the top cover and trim.
Details the process of installing the filters into the downdraft unit.
Provides steps to verify power and connections, and advises contacting service for unresolved downdraft operational problems.
To Next Page
