Wolf Blaze - Starting Procedures

23
USER’S MANUAL
Operating Instructions
Using the kick starter
1)Turn the ignition on.
3) Pull out the foot lever, place your foot on it and push firmly and
quickly all the way down. Let the arm return to its horizontal
position before you try to kick start it again. Repeat this motion.
2) The vehicle should be put on the main
stand and you need to hold the brake levers
to allow the engine to start.
4) Twist the throttle slightly to allow more gas flow as
you kick the engine over. Once started, let the engine
warm up before revving the engine to a higher RPM.