Wolf CGB-2-14 User Manual

Wolf GmbH · Postfach 1380 · D-84048 Mainburg · Tel.: +49 (0)8751/74-0 · Fax: +49 (0)8751/74-1600 · www.wolf-heiztechnik.de
Art.-Nr. 3063648_201601 Änderungen vorbehalten!
DE
Austausch der Regelungsplatine GBC-e (Art.-Nr. 2745165)
Austausch Parameterterstecker (Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
GB
Replacement of the Control PCB GBC-e (Art.-Nr. 2745165)
Replacement instructions Boiler coding cards (Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
GR
Αντικατάσταση της πλακέτας ελέγχου GBC-e (Art.-Nr. 2745165)
Οδηγίες για την αλλαγή του φις παραμέτρων (Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
HU
szabályozókártya kicserélése GBC-e (cikkszám: 2745165)
Kódkártya csere (cikkszám: 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
IT
Sostituzione della scheda di regolazione GBC-e (Art.-Nr. 2745165)
Istruzioni per sostituzione scheda parametri (Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
PL
Wymiana płytki regulacji GBC-e (Art.-Nr. 2745165)
Instrukcja wymiany wtyczki parametrowej (Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
RU
Замена печатной платы GBC-e (Art.-Nr. 2745165)
Инструкция по замене параметрического штекера
(Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
SK
Výmena riadiacej dosky GBC-e (Art.-Nr. 2745165)
Návod na výmenu Dátový konektor (Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
CZ
Výměna regulační desky GBC-e (Art.-Nr. 2745165)
Výměna Parametrovací konektor (Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2
ES
Cambio de la platina de regulación GBC-e (Art.-Nr. 2745165)
Instrucciones de sustitución Clavija de parámetros
(Art.-Nr. 2745363, 2745364, 2745365)
CGB-2 / CGB-2K / CGW-2 / CGS-2

Wolf CGB-2-14 Specifications

General

Type	Condensing boiler
Efficiency (80/60°C)	98.0 %
Efficiency	Up to 109%
Fuel Type	Natural gas
Efficiency (50/30°C)	109.6 %

Summary

Electrical Safety Precautions

German Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for German users.

Czech Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for Czech users.

Spanish Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for Spanish users.

English Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for English users.

Greek Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for Greek users.

Additional Electrical Safety Information

Hungarian Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for Hungarian users.

Italian Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for Italian users.

Polish Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for Polish users.

Russian Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for Russian users.

Slovak Electrical Safety Notice

Warning regarding mains disconnection and electrical hazards for Slovak users.

Step 1: Component Identification and Selection

Step 2: Parameter Configuration Overview

Preparation and Access Procedures

Step 3: Disconnecting Power

Ensuring electrical disconnection before proceeding with maintenance.

Step 4: Circuit Breaker Operation

Operation of the main circuit breaker for safety.

Step 5: Opening the Unit Casing

Accessing the internal components of the unit.

Step 6: Removing Protective Covers

Gaining access to internal parts for maintenance.

Component Removal and Installation Steps

Step 7: Initial Fastener Removal

Removing screws to access internal components.

Step 8: Securing and Removing Unit

Process for safely securing and removing the unit.

Step 9: Connecting Components

Illustration showing connection points for components.

Internal Board and Connector Handling

Step 10: Board Installation

Procedure for installing the electronic board.

Step 11: Board Connection

Connecting cables and connectors to the board.

Step 12: Model Compatibility Check

Component Installation and Connection

Step 13: Board Insertion

Inserting the electronic board into its housing.

Step 14: Final Board Connection

Securing the board connection.

Step 15: Securing Component

Audible confirmation of component seating.

Step 16: Final Component Seating

Ensuring the component is firmly in place.

Final Assembly and Power Up

Step 17: Connecting Internal Cables

Reconnecting internal wiring harnesses.

Step 18: Re-attaching Unit Casing

Closing the main housing of the unit.

Step 19: Restoring Power Supply

Re-engaging the circuit breaker.

Step 20: Powering On the Unit

Activating the unit after installation.

BCC Copying and Verification

Step 21: Initiating BCC Copying

Starting the process to copy BCC data.

Step 22: BCC Check and ID Entry

Verifying BCC data and entering ID.

Navigating the Control Interface

Step 23.1: Accessing Main Menu

Navigating to the main menu interface.

Step 23.2: Identifying Contractor Status

Understanding the 'Contractor' status in the menu.

Step 23.3: Password Authorization

Entering password for authorization.

Parameter Adjustment and Operation

Step 23.5: Selecting 'Parameter' Mode

Navigating to and selecting the parameter setting mode.

Step 23.6: Parameter Range HG01-HG43

Displaying and selecting parameters within a range.

Step 23.7: Adjusting Parameter HG43

Modifying the value of parameter HG43.

Step 23.8: Parameter Effect Example

Visual representation of parameter effect on operation.

Parameter Operations and Warnings

Step 23.9: Confirming Parameter Change

Confirming the selected parameter value.

Step 23.10: Returning to Home Screen

Navigating back to the home screen.

Step 23.11: Operating Mode Selection

Selecting and confirming an operating mode.

Step 23.12: Reading Parameter Warnings

Displaying and understanding parameter-related warnings.

Step 24: Final Parameter Check