To Next PageTo Next PageHow to fix faulty stratification sensor on Wolf Boiler?
If the Wolf Boiler displays a faulty stratification sensor, it indicates a problem with the stratification cylinder sensor or its lead. Check the sensor and lead to resolve this.
How to fix header sensor fault on Wolf COB-40?
If the Wolf Boiler indicates a faulty header sensor, there is likely an issue with the sensor or its lead. Check the sensor and lead to troubleshoot.
Why Wolf COB-40 has insufficient water pressure?
If the Wolf Boiler displays insufficient water pressure, it's because the pressure switch isn't activating due to low water pressure (below 0.8 bar). Ensure the system pressure is above 1.5 bar, inspect the water pressure switch and its lead, and then press the reset button.
General| Type | Condensing Boiler |
|---|---|
| Standard Efficiency | 98% |
| Heating Capacity | 40 kW |
| Operating Pressure | 3 bar |
| Efficiency | 98% |
| Fuel Type | Natural Gas |
