13
TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE SOLUTION
Warming drawer
A fuse may be blown or the circuit breaker tripped. Replace the
does not operate
fuse or reset the circuit breaker.
Warming drawer may not be plugged in. Plug it in.
Warming drawer
Ball bearings are out of alignment. Fully extend the drawer and
does not slide smoothly
close completely to realign.
Warming drawer is overloaded or the load is unbalanced. Reduce
weight to less than 75 lbs (34 kg) or redistribute contents.
Excessive condensation
Liquid is in the warming drawer pan. Remove the liquid.
Foods are uncovered. Cover food with a lid or aluminum foil.
Temperature setting is too high. Reduce the temperature setting.
Incorrect moisture selection setting. Set the moisture selection
lever to the open vent setting to allow for proper venting.
No heat in the
Room temperature may prevent the thermostat from turning on.
proof setting
Verify that the proof light is illuminated.
Food dries out in the
Cover food with a lid or aluminum foil.
proof setting
CONTACT
INFORMATION
Wolf Customer
Service:
800-332-9513
Website:
wolfappliance.com
To Next Page
Loading...
