10
2. Make sure to clean your windshield from the dust
particles and attack attach the electrostatic sticker to the
windshield.
3. Peel off the 3M tape attached to the GPS built-in
bracket and attach it on the electrostatic sticker on the
windshield.
About electrostatic Sticker
Since the adhesive strength is strong on both sides and it is difficult to peel off once it is
pasted, it will be troublesome if the pasting position is incorrect. Therefore, we design
the electrostatic sticker to attached to the windshield first,then stick the bracket with 3M
Adhesive on the electrostatic sticker. You can easily readjust location by sticking the 3M
Adhesive on electrostatic sticker and peel it off.
To strengthen the fixing force,do not attach the unit and leave it for 24 hours or more.
To Next Page
Loading...
