Wonder SPA - Accessories; Technical Specifications

11
INFLATOR GAUGE
WONDER SPA
•Do not use for ination or checking pressure of tyres containing water
ballast or anti-puncture products.
•Avoidcontactwithsolventsorhydrocarbons.
•Periodicallycheckthatthelterneartheinletofairfromthecompressoris
in correct working order.
•Keeptheproduct,itsaccessoriesandanypackingmaterialsoutofreach
of children.
•The disposal of this product must conform to the local regulations in force
to respect the environment and correct waste disposal.
•Donotattempttoinatethetyreifthegaugeisnotconnectedtoacompressor
orothersourceofairornitrogenasthiswillcausethetyretodeate.
•It is recommended to use original  accessories.
•Onlypersonnelapprovedbyareauthorizedtocarryoutrepairs.
doesnotcarryoutrepairsoninstrumentsmorethan5yearsafter
the date of manufacture and does not accept for examination and repair
instruments with missing parts or on which attempts of disassembly or
modicationshavebeenmade.
3
The black square placed on the dial before the start of the measurement scale indica-
testhepositionofthepointerwhentheinstrumentisatrest.Thisisapurelyindicative
reference and cannot be used for calibration purposes. Variations in the pointer position
relativetothisreferencedonotimplyincorrectcalibration.
 
 
(optional on request)
 
(optional available only for 1997 model)
TECHNICAL SPECIFICATIONS
ACCESSORIES

 
3
: 0.7 ÷ 10 bar | 10 ÷ 145 psi | 70 ÷ 1,000 kPa
 0.1 bar | 1.45 psi | 10 kPa
 -10°C ÷ + 40°C
 66 m
3
/h at 10 bar | 145 psi | 1,000 kPa
 15 bar | 218 psi | 1,500 kPa

 
3
: 0.7 ÷ 6 bar | 10 ÷ 87 psi | 70 ÷ 600 kPa
 0.1 bar | 1.45 psi | 10 kPa
 -10°C ÷ + 40°C
 66 m
3
/h at 10 bar | 145 psi | 1,000 kPa
 8 bar | 116 psi | 800 kPa

 
3
: 0.5 ÷ 3.5 bar | 7 ÷ 50 psi
 0.1 bar | 1.45 psi
 -10°C ÷ + 40°C
 66 m
3
/h at 10 bar | 145 psi | 1,000 kPa
 6 bar | 87 psi | 600 kPa