To Next PageTo Next Page
Need help?Do you have a question about the Wonderfire 2570 and is the answer not in the manual?
General| Brand | Wonderfire |
|---|---|
| Model | 2570 |
| Category | Stove |
| Language | English |
Maintaining safe distances and clearances around the stove for proper ventilation and fire prevention.
Specific clearance requirements for installing the heater in an alcove.
Clearance guidelines for combustible ceilings or mantels above the heater.
Details on approved vent components and general venting requirements for the gas heater.
Minimum clearances required for exterior vent terminals and surrounding areas.
Guidelines on the maximum permissible length and rise for the vent system.
Step-by-step instructions for attaching the stove's legs and adjustable levellers.
Procedures for installing the optional #5081 convection fan kit, including blower and rheostat.
Instructions for connecting the appliance adaptor and attaching vent pipes, including optional painting.
Steps for finishing the vent system installation, focusing on parallel installations and wall penetrations.
Guide on how to properly install the log set into the stove's firebox.
Detailed steps for safely removing and reinstalling the stove's front panel and glass assembly.
Instructions on correctly positioning the pre-assembled log set on the burner within the firebox.
Connecting the thermostat and main gas supply line to the control valve for operation.
Information on converting the gas burner between Natural Gas and Propane.
Step-by-step guide for lighting the pilot and burner, and procedures for safely turning off the stove.
Understanding switch functions and procedures for relighting the pilot if it goes out.
Critical safety precautions and instructions to follow before attempting to light the gas appliance.
Guidance on cleaning and maintaining the stove's painted and porcelain enamel surfaces.
Instructions for removing the front panel and glass for inspection or cleaning.
Steps for reinstalling the glass and front panel assembly after maintenance or replacement.
Annual cleaning of the log assembly and inspection of the vent system by a qualified technician.
Procedure for replacing the fiberglass gasket sealing the glass panel and firebox.
Understanding the safety switch function and regularly checking the gas flame pattern for proper operation.
How to adjust the burner air shutter for optimal flame picture and to eliminate sooting.
Detailed technical data including fuel, pressures, BTU ratings, clearances, and hearth requirements.
A comprehensive list of replacement parts for the Wonderfire Direct Vent Gas Heater Model 2570.
Electrical wiring diagram illustrating the connections for the gas heater's components.
Detailed clearances required for exterior vent terminations based on building codes and configurations.
