Wood master 3300 User Manual

Wood master 3300

44 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OWNER’S MANUAL

OUTDOOR WOOD FURNACE

3300

4400

HEAVY DUTY

5500

HEAVY DUTY

6500

HEAVY DUTY

Retain this manual/

Conserver ce manuel

WoodMaster.com

IN THE U.S., THIS APPLIANCE

IS FOR NON-RESIDENTIAL

APPLICATIONS ONLY

(p/n 9000804 - REV. A) - AUG-2020

Table of Contents

Other manuals for Wood master 3300

Installation, Operating And Maintenance Manual30 pages

Questions and Answers:

M
Mary HarrellJul 26, 2025
What to do if Wood master Heating System furnace is not heating?
- G
  Guy SandersJul 26, 2025
  If your Wood master Heating System furnace isn't heating, start by checking the fire. Then, inspect the pump and ensure it's running; if not, cut off the power and examine it. Verify the water level and check for system leaks if it's low. Look for creosote buildup in the chimney, as a reduced opening can hinder proper burning. Also, check the Fan Draft and Draft Flapper to ensure correct operation. Confirm the Fan Switch on the ETC is ON, unless you're filling or cleaning. Finally, if the water temperature is 120° or lower, press the Set Button on the ETC System to restart Heating Mode.
R
richardwardAug 11, 2025
Why my Wood master Heating System furnace boils?
- W
  williamolsonAug 11, 2025
  If your Wood master Heating System furnace boils, first check that the fire door is properly closed and that the fire door rope (the fire-resistant gasket) creates a tight seal. Ensure the air intake on the fire door closes tightly. In warm weather, reduce the amount of wood used. Inspect the Auger Head for air leaks and confirm the Ash Auger Head Discharge Door is closed. Make sure to remove air from the system and check the water level to ensure the furnace is full.

Wood master 3300 Specifications

General

Brand	Wood master
Model	3300
Category	Furnace
Language	English

Summary

Outdoor Wood Furnace Best Burn Practices

Fuel Usage Guidelines

Guidelines on the type of fuel to use and avoid in the outdoor furnace.

Furnace Placement Guidelines

Recommendations for locating the furnace considering wind direction and property lines.

Safety - Important Safety Instructions

Pre-Installation Safety Precautions

Essential safety measures and cautions to follow before installing the furnace.

Planning the Location

Digging the Trench

Connecting to Existing Heating Systems

Water Quality and Maintenance

Adding Initial Water Treatment

Procedure for adding corrosion inhibitor before filling the system.

Operating Instructions

Firing the Furnace

Instructions on how to start and operate the furnace fire.

Loading the Furnace

Routine Maintenance Procedures

Troubleshooting Guide

Building Temperature Loss

Diagnosing causes for the building losing temperature and potential solutions.

Outdoor Furnace Overheating

Identifying reasons for furnace overheating and corrective actions.

Pump Trouble or Poor Water Circulation

Troubleshooting frequent pump issues or inadequate water circulation.

Electronic Temperature Control (ETC) Guide

ETC System Reference

ETC Front Panel Commands

Temperature Alarm and Duration

Resetting Recorded Alarms

Procedure to reset recorded temperature alarms on the ETC system.

Changing ETC Setpoints and Parameters

Changing Parameter Values

Advanced ETC Settings Adjustment

Adjusting Set Point

How to change the furnace's target operating temperature (Set Point).

Adjusting Differential (Hy)

Setting Low Alarm (ALL)

Technical Specifications

Limited Lifetime Warranty

Firebox and Water Jacket Warranty

Details the limited lifetime warranty for the firebox and water jacket.

Two Year Parts and Labor Warranty

Related product manuals

Wood master 4400 Heavy duty

Wood master CleanFire 500