Wood master CleanFire 500 User Manual

OWNER’S MANUAL
SAVE THESE
INSTRUCTIONS
(p/n 9000752) - JUN 2020
WARNING: If the information in this manual is not followed exactly, a re or explosion may result causing property
damage, personal injury or loss of life.
– Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Immediately call your gas supplier. Follow the supplier’s instructions.
• If you cannot reach your gas supplier, call the re department.
– Installation and service must be performed by a qualied installer, service agency or the gas supplier.
OUTDOOR WOOD FURNACE
0117WB036S
0117WB039E
CLEANFIRE 700
CLEANFIRE 500
CLEANFIRE 300

Wood master CleanFire 500 Specifications

General

Brand	Wood master
Model	CleanFire 500
Category	Furnace
Language	English

Summary

Important Precautionary Information

General Safety Guidelines

Essential precautions for installation, operation, and maintenance to prevent hazards.

Water Quality and Maintenance

System Maintenance Overview

Wood Selection and Preparation

Operating Instructions

How the CleanFire Works

Explains the furnace's efficient design and basic operating principles.

Cold Start Firing Procedure

Core Operation Procedures

Adding Wood

Instructions for loading wood, managing ash, and ensuring proper airflow.

Preventive Maintenance Schedule

Routine Maintenance and Controls

Routine Maintenance Guidelines

General advice for regular inspections and upkeep to ensure longevity.

Detailed Maintenance Sections

Component Servicing and Replacement

Complete Cleaning Procedures

Section 14 - Complete Cleaning

Comprehensive guide for thoroughly cleaning the furnace's main components.

Serviceable Items - Door and Seals

Firebox Door Hinge/Latch Adjustment

How to adjust hinges and latches for proper firebox door closure.

Firebox Door Seal Replacement

Instructions for replacing the firebox door seal to ensure an airtight closure.

Door Seal Replacements

Reaction Chamber Door Seal

Steps for replacing the seal on the reaction chamber door for an airtight seal.

Heat Exchanger Door Maintenance

Heat Exchanger Door Seal Replacement

Procedure for replacing the heat exchanger door seal to maintain airtightness.

Troubleshooting Overview

General Troubleshooting Information

Initial steps for diagnosing and resolving common furnace operational issues.

Troubleshooting Specific Situations

Furnace Not Operating Correctly

Addresses common reasons for furnace malfunction and how to correct them.

Pump Trouble or Poor Water Circulation

Solutions for frequent pump issues and problems with water circulation.

Corrosion Present - Call Dealer

Guidance on identifying and addressing corrosion issues within the furnace system.

Limited Warranty Information