Wood master CleanFire 700 User Manual

OWNER’S MANUAL
SAVE THESE
INSTRUCTIONS
(p/n 9000752) - JUN 2020
WARNING: If the information in this manual is not followed exactly, a re or explosion may result causing property
damage, personal injury or loss of life.
– Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Immediately call your gas supplier. Follow the supplier’s instructions.
• If you cannot reach your gas supplier, call the re department.
– Installation and service must be performed by a qualied installer, service agency or the gas supplier.
OUTDOOR WOOD FURNACE
0117WB036S
0117WB039E
CLEANFIRE 700
CLEANFIRE 500
CLEANFIRE 300

Wood master CleanFire 700 Specifications

General

Brand	Wood master
Model	CleanFire 700
Category	Furnace
Language	English

Summary

Important Precautionary Information

Foundation

Ground Rod Kit

Furnace Installation - Connecting to Your Existing System

Outdoor Wood Furnace Best Burn Practices

Water Quality and Maintenance

Adding Antifreeze to Outdoor Furnace System

Initial Water Treatment, Fill and Testing

System Maintenance

Draining Treated System Water

Wood Selection and Preparation

Operating Instructions

How the CleanFire Works

Cold Start Firing

Step-by-step guide for starting the furnace from a cold state.

Adding Heat Load

Adding Wood

Maintenance Schedule

Preventive Maintenance Schedule

A table outlining recommended maintenance tasks and their frequencies.

Control Locations

Routine Maintenance

General advice and importance of regular inspections and upkeep.

Serviceable Items

Reaction Chamber Door Seal

Heat Exchanger Door Seal

Circuit Breaker

Airbox Seal

Air Tube and Refractory Modules

Thermocouple

Heat Exchanger Door Insulation

Heat Exchanger Access Cover Insulation

Combustion Air Tube and Front Air Channel

Troubleshooting

General Troubleshooting Information

Steps to review before addressing specific furnace operating issues.

Troubleshooting Other Situations

Furnace Not Operating Correctly

Common issues and solutions when the furnace is not functioning as expected.

Fire Goes Out or Keeps Going Out

Troubleshooting steps for frequent fire extinguishment.

Building is Losing Temperature

Identifying causes and solutions for heat loss in the heated building.

Frequent Pump Trouble or Poor Water Circulation

Diagnosing and resolving issues with circulation pumps and water flow.

Burning Excessive Wood

Factors contributing to high wood consumption and potential solutions.

Visible Exhaust From Chimney

Understanding normal vs. abnormal exhaust plume conditions.

Corrosion Present

Identifying and addressing causes of corrosion within the furnace system.

Wiring Diagram

Water Sample Information - Cleanfire Models

Limited Warranty - Cleanfire Models