Need help?Do you have a question about the Wood-mizer TVS and is the answer not in the manual?
General| Category | Saw |
|---|---|
| Manufacturer | Wood-Mizer |
| Model | TVS |
| Type | Twin Vertical Saw |
| Fuel type | Electric |
Explains warning symbols, signal words, and general safety instructions.
Details required safety clothing, gloves, and eye protection.
Guidelines for maintaining a clean area and proper by-product disposal.
Essential checks before operating the machine for safety.
Information on keeping persons/hands away from hazards.
Procedures and precautions for performing maintenance safely.
Detailed steps and requirements for lockout/tagout.
Guidance on maintaining and understanding safety labels.
Introduction to the Wood-Mizer TVS saw and its intended use.
Identifies and explains functions of control panel components.
Prerequisites and conditions for setting up the TVS machine.
Step-by-step guide for replacing and tensioning saw blades.
Procedure for aligning the blade on the wheels for proper tracking.
Steps to safely start the saw motors and feed track.
How to adjust the feed track and its speed for optimal cutting.
Procedure for setting the desired cutting width.
Instructions for using the blade lubrication system.
Step-by-step guide for the sawing process.
Safe operation of log loading ramp and transfer deck.
Initializing and configuring the Setworks system.
How to choose measurement units (Imperial/Metric) for Setworks.
Procedure to calibrate Setworks control with saw head position.
How to set and adjust programmed preset positions for the saw heads.
Estimated life for common replacement parts.
Procedures for checking and maintaining blade guides.
Instructions for cleaning sawdust from the machine.
Guidance on lubricating various machine parts.
Maintenance for blade tensioner and drive belts.
How to adjust tension for feed track and deck chains.
Cleaning and maintenance procedures for the lube system.
Guidelines for regular alignment checks and procedures.
Comprehensive steps for full resaw realignment.
Detailed steps for aligning the blade wheels.
Procedure for adjusting the tilt of the saw heads.
Instructions for installing and ensuring tables are level.
Steps to properly align the blade guide assemblies.
How to calibrate the scale for measuring blade distance.
Physical dimensions and layout of the Twin Vertical Saw.
Details on power supply, voltage, and electrical diagrams.
Information on material size limits and feed speeds.
Details on blade and feed track motor power and type.
To Next Page