Need help?Do you have a question about the Wood-mizer LT35 and is the answer not in the manual?
General| Brand | Wood-mizer |
|---|---|
| Model | LT35 |
| Category | Saw |
| Language | English |
Introduces the purpose and scope of the manual.
Provides contact information and service details for Wood-Mizer.
Details technical specifications for the LT35 sawmill model.
Explains how to identify your sawmill using model and VIN numbers.
Outlines the limited product warranty terms and conditions.
Explains the meaning of hazard symbols and signal words.
Provides essential safety guidelines for operating the sawmill.
Details procedures for safely isolating power before maintenance.
Guides on preparing the site and setting up a stationary sawmill.
Instructions for setting up a portable sawmill, including outrigger adjustment.
Step-by-step guide for safely changing the sawmill blade.
Explains how to properly tension the bandsaw blade.
Details how to adjust the blade to ensure it tracks correctly on the wheels.
Provides guidance on safely starting the sawmill engine.
Explains operation of the optional hydraulic loader and turner controls.
Covers the procedures for loading, turning, and securing logs on the sawmill bed.
Details how to operate the up/down system for blade height adjustment.
Guides on initial setup and operation of the Simple Set system.
Explains how to adjust the blade guide arm for proper blade support.
Covers the controls and operation of the power feed system for carriage movement.
Provides instructions for performing cuts on logs using the sawmill.
Describes the process of edging boards to achieve straight, parallel sides.
Explains how to use the blade height scale for accurate lumber thickness.
Details the function and operation of the water lube system for blade cleaning.
Instructions on how to prepare the sawmill for safe transport.
Lists estimated life expectancy for common replacement parts.
Maintenance procedures for the blade guide assemblies.
Instructions for removing sawdust from critical areas of the sawmill.
Maintenance of the sawmill's carriage track system for smooth operation.
Cleaning and maintenance of the vertical mast rails.
Maintenance and inspection of the blade wheel belts.
Steps for adjusting the drive belt tension for optimal performance.
Routine checks and maintenance for the hydraulic system.
Maintenance procedures for the up/down chain and belt systems.
Maintenance for the power feed system, including chain adjustment.
Safe procedures for charging the sawmill's battery.
A consolidated chart of maintenance tasks and intervals.
Solutions for common issues encountered during sawing operations.
Diagnosing and resolving electrical system issues.
Troubleshooting common problems with the power feed system.
Diagnosing and resolving issues with the hydraulic loader/turner.
Guidance for troubleshooting the Simple Set control system.
Procedures for regular alignment to maintain cutting accuracy.
Comprehensive alignment steps for the entire sawmill.
Diagram illustrating the hydraulic system components and connections.
Visual layout of the hydraulic system's hoses and components.
List of hydraulic components with part numbers and descriptions.
Details of hydraulic hoses, including color code, length, and application.
Electrical wiring diagrams for the D24 model.
List of electrical components for the D24 model with part numbers.
Wiring schematic for the engine harness of the D24 model.
Electrical wiring diagrams for the G25 model.
List of electrical components for the G25 model with part numbers.
To Next Page