Woodhaven 3000 User Manual

3000, 3002 & 3004
Planing Sled
Owners Manual
Please Read Carefully!
Part# Description Qty.
5521 1/4" Knob 2
Part# Description Qty.
5760B Oval Nut 12
Part# Description Qty.
5590 Knob 2
Part# Description Qty.
BUSH050 3/8” Spacer 10
Parts List:
Please identify and verify that you have all of
the hardware shown. Please refer to photos in the
instructions for the parts listed below:
Part Description Quantity
3000B Brackets, 4 pc. set (2 pairs) . . . . . . . . . . . . . 1
3000P NoDrill Plate . . . . . . . . . . . . . . . . . . . . . . . . . 1
4973 NoDrill Plate Hdw. . . . . . . . . . . . . . . . . . . . . 1
4406 6" Ultra Track . . . . . . . . . . . . . . . . . . . . . . . . 2
Model 3000 also includes the parts below:
4436 36" Ultra Track . . . . . . . . . . . . . . . . . . . . . . . 2
4016 16" Double Track . . . . . . . . . . . . . . . . . . . . . 2
Model 3002 also includes the parts below:
4448 48" Ultra Track . . . . . . . . . . . . . . . . . . . . . . . 2
4024 24" Double Track . . . . . . . . . . . . . . . . . . . . . 2
Model 3004 also includes the parts below:
4460 60" Ultra Track . . . . . . . . . . . . . . . . . . . . . . . 2
4032 32" Double Track . . . . . . . . . . . . . . . . . . . . . 2
Part# Description Qty.
WS002 Washer 22
Part# Description Qty.
5860 Ratchet Handle 4
Part# Description Qty.
NUT006 Acorn Nut 4
Part# Description Qty.
HB020 3/4" Bolt 6
Part# Description Qty.
CAB015 Angle Bracket 8
Part# Description Qty.
STP004 1/2" Screw 16
Part# Description Qty.
PAD1 Glide Pad 8
Part# Description Qty.
HB030 1” Bolt 14
Part# Description Qty.
MF006 5/8" screw 4
BEFORE BEGINNING
The Planing Sled must be setup and used on a flat surface.
Identify and verify that you have all the parts listed. You'll need a
7/16" wrench for assembly. Read the instructions carefully at least
once before beginning.

Woodhaven 3000 Specifications

General

Brand	Woodhaven
Model	3000
Category	Tools
Language	English

Summary

Parts List

Before Beginning Assembly

Initial setup steps and prerequisites for the planing sled. Read instructions before starting.

Assembly - Router Sled

Attach Router to Sled Plate

Instructions for mounting the router to the router plate and positioning it for best use.

Install Ultra Tracks

Attaching 6" Ultra Tracks to the router plate using oval nuts and screws.

Assembly - Brackets & Rails

Mount Sled Brackets to Double Tracks

Installing sled brackets onto double tracks using bolts, nuts, and washers.

Attach Ultra Tracks to Brackets

Sliding ultra tracks onto brackets and securing them with ratchet handles for initial positioning.

Install Stops on Ultra Tracks

Adding bolts, spacers, washers, and knobs to the ultra tracks to control sled movement.

Setup Options for Planing

Option A: Part Thinner Than 3" with Parallel Edges

Setup for thin parts with parallel edges, focusing on portability and specific rail attachment.

Setup Option B: Any Shape Part Thinner Than 3"

Semi-Permanent Workbench Setup

Setup for odd-shaped thin parts, serving as a semi-permanent planing workbench in your shop.

Setup Option C: Parts 3" or Thicker

Resurfacing Thick Parts

Method for resurfacing thick parts like butcher blocks and workbenches using 1-1/2" x 3" rails.

Planing Operation

Performing the Planing Process

Instructions on how to plane parts, including depth of cut, passes, and safety precautions.

Cut Issue Troubleshooting

Fixing Dished Cuts

Adjusting front or back spacers/glides to correct a dished cutting pattern.

Fixing Stepped Cuts

Adjusting side spacers/glides to correct a stepped cutting pattern.