Woodpeckers MFT User Manual

MFT Layout & Assembly Square
Owner’s Manual
The primary function of the Woodpeckers MFT Layout & Assembly
Square is to align the miter fence and the guide rail on the Festool
MFT table. However, it is also useful for setting 45 & 90-degree
angles on your table and miter saw, or larger bandsaw, as well as
clamping large workpieces.
If you think you’re missing anything, please email us at mailroom@
woodpeck.com. You can also call us at 440.238.1918 from 9:00 a.m.
to 5:00 p.m. EST Monday–Friday.
MFT Layout & Assembly
Square Dogs
MFT Layout & Assembly
Square
If you think you’re missing anything, email us at mailroom@woodpeck.com.
You can also call us at 800-752-0725 from 9:00 a.m. to 5:00 p.m. EST Monday - Friday.

Woodpeckers MFT Specifications

General

Brand	Woodpeckers
Model	MFT
Category	Tools
Language	English

Summary

MFT Layout & Assembly Square Owner's Manual

Introduction and Primary Function

Details the primary use of the square for aligning miter fence and guide rails, plus other applications.

Using the MFT Layout & Assembly Square

Aligning Guide Rails and Fences

Steps to position the guide rail and align the fence using the square for precise setup.

Using the MFT Layout & Assembly Dog

Inserting the Dog

Instructions for placing the square on the MFT table and inserting the dog.

Using the MFT Layout & Assembly for Clamping

Clamping Large Workpieces

Guidance on using the square to clamp large workpieces with MFT or F-body clamps.