Need help?Do you have a question about the Woods 50009 and is the answer not in the manual?
General| Type | Mechanical Timer |
|---|---|
| Number of Outlets | 1 |
| Amperage | 15A |
| Wattage | 1875W |
| Power Source | AC |
| Indoor/Outdoor | Indoor |
| Maximum Load | 1875W |
| Material | Plastic |
| Color | White |
Plug the timer into a wall outlet for 10 minutes to charge the internal battery.
Use the R button with a toothpick to erase all previous timer settings.
Hold CLOCK button, press HOUR/MINUTE for time, hold DAY for correct day.
Use PROG, HOUR, MINUTE, DAY buttons to set ON/OFF times and days for programs.
Press PROG to cycle through all 20 settings to check for unintended ones.
Scroll to setting with PROG, use HOUR, MINUTE, DAY to change time/days.
Scroll to setting with PROG, press RST/RCL to remove (dashes) or restore.
Plug device into timer, turn on device, then plug timer into wall outlet.
Press ON-OFF button to permanently set device to ON, OFF, or AUTO mode.
Hold HOUR-RND in AUTO mode to activate random ON/OFF times for security.
Set 'd ON' or 'd OFF' time, press CLOCK then RCL-CD to activate countdown.
Hold CLOCK-DST to advance time by one hour; 'DST' appears on display.
To Next Page
