27 Dealer Service
MAN1256 (3/23/2018)
Figure 26
. Crossbar Timing - Bottom View
UNIVERSAL JOINT REPAIR
Figure 27
. Universal Joint Parts Breakdown
U-JOINT DISASSEMBLY
1.
Remove external snap rings from yokes in four locations as shown in
Figure 28.
Figure 28.
Remove Snap Ring
2.
With snap rings removed, support drive in vise, hold yoke in hand and tap
on yoke to drive cup up out of yoke. See Figure 29.
Figure 29
. Remove Cups
3.
Clamp cup in vise as shown in Figure 30 and tap on yoke to completely
remove cup from yoke. Repeat Step 2 and Step 3 for opposite cup.
Figure 30.
Remove Cups
4.
Place universal cross in vise as shown in Figure 31 and tap on yoke to
remove cup. Repeat Step 3 for final removal. Drive remaining cup out
with a drift and hammer.
1. Yoke
2. Cup and bearing
3. Snap ring
4. Journal cross
To Next Page