Woods MRD20 Silent - Page 6

76
Trouble Cause Solution
The dehumidier doesn’t
work
Is the power cord connected? Connect the unit to a power outlet
Is the room temperature over 35°C or below
5°C?
Increase or decrease room tempe-
rature
The dehumidier stops operating when the
set humidity is 2% higher than the ambient
humidity
To save energy, set the humidity level
higher
The unit doesn’t start Is the lter blocked? Clean the lter
Is the air inlet or air outlet jammed? Clear the blockage
No air inlet Is the lter blocked? Clean the lter
Abnormal noise Is the unit inclined? Move the unit to a at and solid
ground
Is the lter blocked? Clean the lter
Trouble code: C2 When the display shows C2, there is a pro-
blem with temperature sensor or the connec-
tion wire is not properly xed
Contact your retailer
Trouble code: C1 When the display shows C1, there is a pro-
blem with humidity sensor or the connection
wire is not properly xed
Contact your retailer
Trouble code: C3 Refrigerant leakage Contact your retailer
MRD20 Silent MRD20
Maximum working area 120 m
2
100 m
2
Recommended working area 2-80 m
2
2-60 m
2
Air ow 176 - 194 m
3
/h 143 - 187 m
3
/h
Capacity at 20ºC & 70% RH 14 litres 10,6 litres
Capacity at 30ºC & 80% RH 25 litres 20 litres
Power at 20°C & 70% RH 285 W 233 W
Power at 30°C & 80% RH 400 W 310 W
Sound level 46 dB 48 dB
Working interval temperature 5°C to +35°C 5°C to +35°C
Water tank 4,2 l 4,2 l
Fan speeds 3 3
Dims, LxWxH 240x356x593 mm 240x356x593 mm
Weight 12,5 kg 12,5 kg
Cooling media R134 A (165 g) R134 A (155 g)
IP rating IP22 (X2) IP22 (X2)
Trouble shooting
If you are having trouble with your dehumidier, please refer to below trouble shooting. If nothing of the below works,
please contact your retailer for servicing of your dehumidier.
English