To Next PageTo Next Page
Need help?Do you have a question about the Woods MRD10 and is the answer not in the manual?
General| Brand | Woods |
|---|---|
| Model | MRD10 |
| Category | Dehumidifier |
| Language | English |
Read instructions carefully before installation and use; manufacturer not responsible for incorrect installation/use.
Appliance use by children aged 8+ and persons with reduced capabilities requires supervision.
Intended for household use, keep ventilation clear, avoid mechanical defrost, no ignition sources.
Qualified person must install; ensure adequate space, stable surface, and correct electrical connection.
Connect to grounded outlet, check electrical info, avoid extension cables, and ensure plug access.
Do not modify appliance, avoid refrigerant circuit damage, keep away from flammable products and ignition sources.
Disconnect, cut cable, and contact municipality for correct disposal of the appliance.
Follow steps for initial setup, including standing time, location selection, airflow, surface, and clearance.
Identify product parts such as handle, control panel, air plate, and water tank.
Understand buttons for power, timer, humidity settings, and indicator lights.
Information on connecting a drainage tube for permanent water drainage.
Avoid heat sources/sunlight; place in centre, consider bathroom regulations, and allow 4 hours after horizontal transport.
Check reservoir, connect power, set humidity level, and understand automatic shut-off when full.
Connect hose to back pipe and lead to a drain, ensuring downward flow.
Clean filter regularly by washing or vacuuming to prolong machine life.
Dehumidification may intermit during defrost; do not turn off the unit.
Purpose is to remove humidity and dry items; it produces heat and increases room temperature.
Ensure water tank is empty, run ventilation mode, collect cord, clean filter, and clean unit with moist cloth.
Contact local retailer for servicing; proof of purchase is required for warranty claims.
Store in a clean, dry environment after ensuring water tank is empty.
Hints for extreme dampness, low temperatures, hydrostat margin, and optimizing dehumidification.
Lists common problems like 'Dehumidifier does not work' or 'Does not dehumidify' with causes and remedies.
Details of the 2-year consumer warranty, validity conditions, and exclusions.
Provides technical data for MRD10 and MRD14 models, including area, airflow, power, and dimensions.
Specifies optimal temperature and relative humidity ranges for effective operation.
Indicates responsible disposal of the product to prevent environmental harm.
