4 Introduction
MAN1300 (1/14/2020)
SPECIFICATIONS
ORDERING INFORMATION
POST HOLE DIGGER MODEL PD25.20 PD35.30 PD95.50
3-Point Hitch CAT 1,
Limited CAT 1
CAT1 CAT 1 or CAT 2
Tractor Horsepower 15 - 25 hp 20 - 35 hp 35 - 95 hp
Tractor PTO 540 RPM 540 RPM 540 RPM
Approximate Weight 177 lbs 178 lbs 245 lbs
Driveline protection 3/8 x 3
Grade 2
Shear Bolt
3/8 x 3
Grade 2
Shear Bolt
3/8 x 3
Grade 2
Shear Bolt
Auger Length 36 inches
(recommended)
48 inches
(recommended)
48 inches
(recommended)
Auger Points Cast Ductile Iron, Spiral Point, Replaceable
Cutting Teeth Alloy Steel, Hardened, Replaceable
Gearbox 540 RPM, Roller and Ball Bearings, Cast Iron Housing
Gearbox Lubrication SAE 90 Weight Gear Lube
PART NO. DESCRIPTION
S24054600 6" x 36" auger with screw point and replaceable cutting edges
S24054700 9" x 36" auger with screw point and replaceable cutting edges
S24054400 12" x 36" auger with screw point and replaceable cutting edges
612862 6" x 48" auger with spiral point and replaceable carbide cutting edges
612864 9" x 48" auger with spiral point and replaceable carbide cutting edges
612865 12" x 48" auger with spiral point and replaceable carbide cutting edges
612866 18" x 48" auger with spiral point and replaceable carbide cutting edges
612867 24" x 48" auger with spiral point and replaceable carbide cutting edges
(Rev. 8/3/2020)
To Next Page
