Need help?Do you have a question about the Woods RC3.5 and is the answer not in the manual?
Offers a safety training video for mower operation.
Emphasizes reading manuals and safety rules for safe operation.
Details pre-operation checks and safety precautions.
Basic operational safety guidelines.
Warns about hazards from rotating blades and thrown objects.
Warns about contact hazards with the rotating driveline.
Warns about crushing, pinching, and falling hazards during operation.
Lists critical rules for preventing injury or death.
Warning against exceeding the specified PTO speed.
Mandates full chain shielding for safety in certain areas.
Prohibits riders on the tractor or attachment.
Discusses weight distribution for tractor stability.
Instructions for securely attaching the cutter to the tractor.
Guides on connecting, disconnecting, and adjusting the driveline.
Step-by-step guide for shortening the driveline.
Instructions for adjusting the cutter's cutting height.
Guidance on setting up for shredding material.
Techniques for efficient and safe cutter operation.
A checklist of tasks before operating the cutter.
Explains the safe method for blocking the cutter.
Details lubrication points and frequency.
Instructions for lubricating gearbox and driveline.
Procedures for servicing and replacing the cutter blades.
How to sharpen and maintain the blades.
How to adjust the slip clutch for protection.
Instructions for replacing shear bolts.
Procedures for cleaning the equipment after use and storage.
Addresses common issues encountered during mowing.
Procedures for gearbox maintenance and seal installation.
Detailed steps for repairing shaft seals.
Step-by-step guides to disassemble and reassemble the gearbox.
Instructions for removing and installing the crossbar.
How to repair universal joints, including disassembly.
Steps to assemble the universal joint.
Checklists for dealers before and upon product delivery.
Instructions for dealers to set up the cutter.
Steps to disassemble the shipping unit.
Instructions for assembling the cutter components.
Steps for installing the driveline, shear bolt or slip clutch.
Install shielding and fill the gearbox before operation.
Lists parts for the main assembly.
Lists parts for gearbox, blade, and drive assembly.
Lists parts for drivelines.
Exploded view and parts list for chain shielding.
Exploded view and parts list for skid shoes.
Chart showing bolt thread sizes and wrench sizes.
Glossary of abbreviations used in the manual.
Specific warranty periods for parts and conditions.
To Next Page
General
