EasyManua.ls Logo

Woods BATWING BW12 - User Manual

Woods BATWING BW12
56 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPER ATOR'S MANUAL
BATWING-
ROTARY CUTTER
MAN1078
(Rev. 4/1/2021)
®
BW12

Table of Contents

Questions and Answers

  • D
    Derek Murphy IIAug 12, 2025
    Why is my Woods BATWING BW12 Cutter not cutting?
    • M
      Michael HallAug 12, 2025
      If the Woods Cutter is not cutting, several factors could be at play. The blades might be dull, in which case you should sharpen them. Alternatively, the blades could be worn or broken, requiring replacement (always replace in pairs). Ensure the PTO speed is set correctly and that the ground speed isn't too fast. Also, verify the drive shaft connection and check the gearbox for any malfunctions. Clutch slippage and incorrect blade direction can also prevent proper cutting; in these cases, repair the gearbox and adjust the clutch, respectively. Finally, ensure the blade edge is correct for the direction of rotation.
  • R
    Rebecca CoffeyAug 16, 2025
    What to do if Woods Cutter leaves streaks or ragged cut?
    • A
      Angela RichardsonAug 16, 2025
      If your Woods Cutter leaves streaks or a ragged cut, start by checking the blades. They may be broken or worn, requiring replacement or sharpening. Ensure the machine is level and that the ground speed isn't too fast. Avoid excessive cutting heights and, if dealing with very lush and tall vegetation, consider recutting at a 90° angle to your first pass.
  • M
    mcdanieltheresaAug 19, 2025
    What causes excessive clutch slippage in Woods BATWING BW12?
    • C
      Christopher HicksAug 19, 2025
      If you are experiencing excessive clutch slippage with your Woods Cutter, the clutch might be out of adjustment, so adjust it. Alternatively, the clutch discs may be worn, necessitating replacement. Blades hitting the ground can also cause this issue, so raise the cutting height.
  • B
    Bonnie MartinezAug 25, 2025
    How to fix vibration in Woods BATWING BW12 Cutter?
    • V
      Virginia SmithAug 25, 2025
      If the Woods Cutter is vibrating, a broken blade could be the cause; replace the blades in pairs. Check the gearbox shafts for side play, as this may indicate bearing failure. Also, ensure the hitch length is correct and, if applicable, adjust the pedestal bearing height to be parallel to the ground for universal drive.
  • G
    George JonesAug 27, 2025
    What to do if blades are hitting deck of Woods BATWING BW12?
    • M
      Micheal WilliamsAug 27, 2025
      If the blades are hitting the deck of your Woods Cutter, it's likely that the blades or crossbar are bent. Replace any bent blades or the crossbar to resolve this issue.
  • O
    oliverkimberlyAug 31, 2025
    What to do if Woods BATWING BW12 Cutter unit will not raise?
    • M
      Marie MillerAug 31, 2025
      If your Woods Cutter unit will not raise, the hydraulic oil level may be low. Add hydraulic oil to resolve this issue.
  • J
    Jane CrosbySep 4, 2025
    Why Woods Cutter doesn’t cut level?
    • B
      Brooke GrahamSep 4, 2025
      If your Woods Cutter unit doesn’t cut level and the wing section cuts lower than the center, lengthen the turnbuckle connecting the center yoke to the wing wheel yoke. If the wing section cuts higher than the center, shorten this turnbuckle.
  • L
    Leon AguilarSep 7, 2025
    How to prevent excessive side skid wear on Woods BATWING BW12 Cutter?
    • E
      Elizabeth TorresSep 7, 2025
      Excessive side skid wear on your Woods Cutter is likely caused by running with the skids continuously on the ground. To fix this, raise the cutting height or adjust the skids.

Summary

Introduction

To the Owner

Provides guidance to the owner on reading the manual and safety.

Safety Alert Symbol Definitions

Explains hazard symbols (DANGER, WARNING, CAUTION) and notes used in the manual.

General Information

Manual Purpose and Scope

Explains the manual's purpose to assist in operation and maintenance.

Directional References

Defines left and right directions as standing behind the equipment facing forward.

Safety Precautions

Mower Safety Video

Recommends watching an online safety video for operating mower equipment.

Safety Rules

Installation and Preparation Safety

Details safety during installation and preparation, including hydraulics.

Tractor and Operator Safety

Emphasizes operator training, proper attire, and control knowledge.

Transportation Safety

Outlines safety measures for transporting the equipment.

Operation Safety

Details safety procedures for operating the mower.

Maintenance Safety

Provides safety guidelines for cleaning, servicing, and repairing.

Storage Safety

Details safety instructions for storing the cutter.

Safety & Instructional Decals

Decal Identification and Location

Illustrates placement and lists identification numbers for safety decals.

DANGER and WARNING Decal Explanations

Explains specific DANGER and WARNING decals related to operation and hazards.

Operation

Connecting Cutter to Tractor

Instructions for connecting the rotary cutter to the tractor's PTO.

Hydraulic Connection and Interference Check

Details hydraulic hose connection and checking for interference.

Cutting Height Adjustment

Provides instructions for adjusting the cutting height of the mower.

Tractor and Cutter Operation

Covers safe operation of the tractor and cutter during mowing.

Transporting and Lock-Up Procedures

Explains procedures for safely transporting the rotary cutter.

Storage Instructions

Step-by-step instructions for storing the cutter properly.

Pre-Operation Checklist

A checklist of items to inspect before operating the equipment.

Owner Service

Blocking Method for Under-Cutter Work

Details safe procedures for blocking the cutter for service.

Lubrication Points and Procedures

Explains lubrication points, frequency, and types of grease/oil.

Blade Maintenance

Instructions for blade removal, installation, and sharpening.

Slip Clutch Adjustment

Guides on adjusting the slip clutch to protect the gearbox and driveline.

Shielding and Tire Servicing

Instructions for repairing shielding and safely servicing tires.

Troubleshooting

Cutting and Performance Issues

Lists common cutting problems and their possible causes/solutions.

Vibration and Leveling Issues

Addresses issues like vibration, blades hitting deck, and uneven cutting.

Dealer Service

Gearbox Maintenance and Seal Replacement

Covers gearbox maintenance, including seal replacement and installation.

Vertical and Horizontal Shaft Seal Repair

Specific procedures for repairing vertical and horizontal shaft seals.

Gearbox Repair Procedures

Detailed steps for disassembling and reassembling the gearbox.

Splitter Gearbox Repair

Instructions for removing, disassembling, and assembling the splitter gearbox.

Crossbar Removal and Installation

Steps for removing and installing the crossbar assembly.

Universal Joint Repair

Guides on disassembling, assembling, and repairing universal joints.

Assembly Instructions

Dealer Set-Up Instructions

Outlines dealer responsibilities for setting up the cutter.

Driveline Installation

Step-by-step guide for installing the driveline onto the cutter.

Hydraulic Hose Set-Up

Instructions for connecting hydraulic hoses for single or dual outlet tractors.

Dealer Check Lists

Pre-Delivery Check List

A checklist for dealers to ensure proper setup before delivery.

Delivery Check List

Points dealers should cover with the customer during delivery.

Parts Index

Center Frame Assembly Parts

Lists and illustrates parts for the center frame assembly.

Main Assembly Parts

Lists and illustrates components of the main assembly.

Wing Assembly Parts

Lists and illustrates parts specific to the wing assemblies.

Tongue Assembly Parts

Lists and illustrates components of the tongue assembly.

Gearbox Assembly Parts

Lists and illustrates parts for the gearbox assembly.

Splitter Gearbox Assembly Parts

Lists and illustrates components of the splitter gearbox assembly.

Wheel & Tire Assembly Parts

Lists and illustrates parts for wheel and tire assemblies.

Appendix

Bolt Torque Chart

Provides torque values for various SAE and metric bolts.

Bolt Size Chart and Abbreviations

Illustrates bolt sizes and defines common abbreviations used in the manual.

Warranty Information

Product Warranty Terms

Outlines the terms and conditions of the product warranty.

Replacement Parts Warranty

Details the warranty specific to replacement parts.

Woods BATWING BW12 Specifications

General IconGeneral
BrandWoods
ModelBATWING BW12
CategoryCutter
LanguageEnglish

Related product manuals