Safety 9
Single Spindle Cutter LD/MD (Rev. 10/27/2006)
dures may be required. Failure to follow these
instructions can result in serious injury or death.
TRANSPORTATION
Disengage the PTO and wait for all moving parts
to come to a complete stop. Raise the tractor 3-
point arms to bring the cutter into transport posi-
tion.
With cutter adjusted to transport position, set
upper stop on tractor lift quadrant to prevent cutter
from contacting driveline while being raised.
STORAGE
Keep children and bystanders away from stor-
age area.
Disconnect cutter driveshaft and secure up off
ground. Raise cutter with 3-point hitch. Place
blocks under cutter side skids. Lower cutter onto
blocks. Disconnect cutter from tractor 3-point hitch
and carefully drive tractor away from cutter.
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
(Rev. 4/02/2020)
To Next Page
Loading...
