Woods RM550 - RM660 MOUNTING ASSEMBLY

38
PN 55191 (4/22/99)
RM660 MOUNTING ASSEMBLY
53
52
51
50
49
18
17
1
M4304C
3
4
5
7
48
4
1
4
8
2
9
32
10
31
37
33
36
44
45
47
46
13
15
4
35
42
6
6
11
12
16
35
41
43
36
35
Ref Part No
No
No Used Description
1 ---------- 1 Front and rear drives (see page 41)
2 18851 1 Shield, front belt
3 18852 1 Shield, right belt
4 66840 6 Knob, 3-prong 3/8 NC
5 55189 1 Gearbox, CW 1:1.76 with decal (see
page 40)
6 19056 2 Link, offset .25 x 1.50 x 38.12
7 18985 1 Gearbox stand
8 18853 1 Shield, left belt
9 29224 1 1 BK 13.4 H Sheave, keyed
10 28943 1 Keyed bushing
11 19605 1 Channel, .38 x 2.5 x 7.3
12 19579 2 Link, offset .38 x 2 x 25.88
13 18824 2 Hitch pin mounting bracket
14 20669 1 Blade spindle wrench
15 33661 2 Category 1 mounting pin with nuts
and lockwasher
16 64814 1 Pipe, 1/2 schedual 40 x 2.75
17 51849 1 Shield, counter cone
18 36986 1 Bracket, PTO hanger
HARDW ARE
Ref Part
No
No Description
31 10378 * 1/4 NC x 1 Hex head cap screw GR5
32 28713 * 3/8 x 3/8 x 1 Key
33 855 * 1/2 Extra-heavy lockwasher
35 11900 * 1/2 NC Flanged hex locknut
36 24576 1/2 NC x 1-3/4 Hex head cap screw GR5
37 25474 * 1/2 NC x 2-1/4 Hex head cap screw GR5
41 29561 * 1/2 NC x 4-3/4 Hex head cap screw GR5
42 19025 * 5/8 NC Hex locknut, flanged
43 34473 * 5/8 NC x 3 Hex head cap screw GR5
44 484 5/8 x 1 x 7/16 HT Sleeve
45 1791 5/8 x 1 x 9/16 HT Sleeve
46 30008 * 7/8 Lockwasher
47 30007 * 7/8 NF Hex nut
48 19024 5/8 x 1-3/4 Hex head cap screw, flanged
49 4378 * 5/16 Standard flat washer
50 2472 * 5/16 Standard lockwasher
51 6096 5/16 NC x 3/4 Hex head cap screw GR5
52 14350 3/8 NC Flanged hex locknut
53 12169 * 3/8 NC x 1-1/4 Hex head cap screw GR5
* Obtain Locally
(Rev. 6/6/2002)