Need help?Do you have a question about the Woodward 9905-858 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| MPN | 9905-858 |
| Operating Temperature Range | -40°C to +70°C |
| Housing Material | Aluminum |
| Input Voltage Range | 18-32 VDC |
| Communication Protocol | Modbus RTU |
| Output Type | Analog |
Details on power supply connections, input voltages, frequencies, and maximum power consumption.
Overview of shutdown conditions, alarms, and their summary functions.
Summary of functions related to system shutdowns and alarm notifications.
Instructions and usage details for the hand-held programmer device.
Details on accessing and using the Configure Mode for system setup.
Explanation of the Service Mode for diagnostics, tuning, and maintenance.
Overview of the fundamental structure and organization of the control program.
Step-by-step guide for programming system configurations using the Configure Mode.
Procedures for programming and tuning parameters within the Service Mode.
Details on accessing and interpreting the alarms menu for system status.
Information on viewing and managing trip events and their causes.
How to access and adjust speed dynamics parameters for optimal control.
Specific instructions for adjusting gain and reset parameters in the service menus.
Accessing and modifying various speed-related values within the service menus.
How to adjust displayed readouts and values for accuracy.
Procedure for checking the status and functionality of inputs and outputs.
Options for configuring speed set points, limits, and relationships.
Configuration settings for the turbine's start modes.
Settings for configuring the interface with the turbine actuator.
Configuration options for the various operating modes of the control.
How to use diagnostic tools and features to identify issues.
A reference chart that maps symptoms to potential causes and solutions.
Information on accessing and adjusting tunable parameters in debug mode.
Troubleshooting specific alarms and shutdown conditions.
Identifying and resolving issues related to wiring and internal components.
Worksheets designed for documenting configuration settings in Configure Mode.
Worksheets for documenting programming and tuning in Service Mode.
To Next Page
