What to do if the Woodward EG-3P has hydraulic pressure supply issues?
If you're experiencing hydraulic pressure supply issues to the actuator of your Woodward Controller, ensure that the hydraulic pressure supply is adequate, clean, and free of foaming. Verify that lines are not clogged and that the filter is properly seated in its housing.
What to do after cover removal of Woodward EG-3P Controller?
After removing and replacing the cover of your Woodward Controller, recheck the terminal shaft travel to ensure it is within the specified range.
General| Brand | Woodward |
|---|---|
| Model | EG-3P |
| Category | Controller |
| Language | English |
Describes safety alert symbols and hazard levels.
Alerts about prime mover shutdown devices.
Advises on necessary safety gear for handling products.
Emphasizes emergency shutdown readiness during start-up.
Notes requirements for supervisory control systems in mobile apps.
Details steps to prevent damage to static-sensitive electronic parts.
Details CE marking requirements and ATEX directives for explosive atmospheres.
Lists compliance with other EU directives and international standards.
Specifies CSA and UL certifications and requirements for North America.
Outlines specific wiring and grounding requirements for safe operation.
Describes the 2301 electric governor and its operation with actuators.
Introduces proportional actuators used with 2301 electric controls, mentioning EGB-2P.
Details the EG-3P actuator, its specifications, and types.
Explains the electro-hydraulic transducer and operation of the EG-3P actuator.
Describes how the EG-3P actuator functions with oil supply and internal mechanisms.
Explains the buffer system in EG-3P actuators for stability.
Describes EG-1P/EG-1PC actuators and their features.
Details the compensation system for EG-3P actuators needing extra stability.
Explains how to adjust the needle valve for stability and response.
Lists parts for the EG-proportional-compensated actuator.
Provides general guidance for mounting the actuator square to the prime mover.
Details fuel linkage adjustment for full travel and freedom from binding.
Describes connection and pressure requirements for shaft-driven oil supply.
Explains oil supply connection and orifice requirements for oil motor models.
Specifies filter requirements for shaft-driven and oil motor models.
Advises on performing adjustments on a test bench with factory presets.
Guides on centering the pilot valve plunger using a test circuit and protractor.
Details how to adjust terminal shaft travel using a potentiometer and Allen wrench.
Explains setting gain, reset, and speed controls on the control box.
Provides a checklist for diagnosing actuator and prime mover operation issues.
Lists components for EG-3P actuators and information for ordering.
Lists options for resolving installation or performance issues with Woodward products.
Outlines available servicing options like replacement, repair, and remanufacture.
Provides instructions for returning controls or parts for repair.
Details packaging materials and procedures for returning controls.
Specifies information needed when ordering replacement parts for controls.
Describes technical support, product training, and field service options.
Provides contact information for distributors and customer service.
Lists required information for contacting technical assistance.
Shows a diagram of the protractor used for terminal shaft adjustment.
Details updates made in Revision R, including compliance and declaration information.
Notes revision advancement for coordination with installation sheets.
Lists updated regulatory compliance information.
States conformity with EU directives for explosive atmospheres and general requirements.
Declares conformity with EU Directive 2006/42/EC for partly completed machinery.
To Next Page
