WOPET F01 PLUS - User Manual

To Next Page

"ML 1" flashes. Press to confirm the meal and continue

to set portion size.Press and to adjust the portions.

When the portion is set, press to save and set the

feeding time.

F01 PLUS Quick Start Guide

Our device uses a 24- hour clock system, for example, 16:00 is equivalent to 4:00 PM

Panel Introduction

Program Setting

MIC

Back(lock)

Recording

Setting

Microphone

Number Increase

Manual Feeding

Number Decrease

Press and Hold for 2s to unlock the screen.

STEP 1— Unlock Screen

STEP 2— Set the Current Time

MIC

Press and hold for 2s to enter setting mode.Press

and to set the current time. Press again to save

and continue to meal settings.

Note: The feeder can work well only when the time of the

feeder is consistent with the current time.

MIC

STEP 3.1— Set Feeding Portion

STEP 3.2— Set Feeding Time

STEP 3.3— Set Other Meals

Press and to set the hour, then press to save to

entering the minute setting.

Repeat the steps for 2-5 meal, when finished the all

meals setting, press to save.

MIC

Need help?

Do you have a question about the WOPET F01 PLUS and is the answer not in the manual?

This document provides a quick start guide for the Wopet F01 PLUS pet feeder.

Function Description

The Wopet F01 PLUS is an automated pet feeder designed to dispense dry pet food at scheduled times. It features a control panel with a display, recording and setting buttons, and manual feeding options. The device operates on a 24-hour clock system, allowing users to program up to five meals per day with customizable portion sizes.

Important Technical Specifications

Food Compatibility: Only suitable for dry food with a size less than 12mm.
Portion Size: One portion is approximately 10g.
Clock System: Uses a 24-hour clock system (e.g., 16:00 is 4:00 PM).
Power Source: Can be battery-powered (requires sufficient battery power for operation).

Usage Features

Panel Introduction: The control panel includes:

Recording: Allows for recording a voice message to play during feeding times.
Setting: Used to access and adjust device settings.
Manual Feeding: Dispenses food instantly.
Microphone: For recording voice messages.
Number Increase (+): Increases values during setting.
Number Decrease (-): Decreases values during setting.
Back (lock): Used to go back or lock the screen.

Program Setting:

Unlock Screen (STEP 1): Press and hold the lock button for 2 seconds to unlock the screen.
Set Current Time (STEP 2):
- Press and hold the setting button for 2 seconds to enter setting mode.
- Use the + and - buttons to set the current time (hour and minute).
- Press the setting button again to save the time and proceed to meal settings.
- Note: The feeder's time must be consistent with the current time for proper operation.
Set Feeding Portion (STEP 3.1):
- When "ML 1" flashes, press the setting button to confirm the meal.
- Use the + and - buttons to adjust the portion size.
- Press the setting button to save the portion and move to setting the feeding time.
Set Feeding Time (STEP 3.2):
- Use the + and - buttons to set the hour.
- Press the setting button to save the hour and enter the minute setting.
- Use the + and - buttons to set the minute.
- Press the setting button to save the minute.
Set Other Meals (STEP 3.3): Repeat steps 3.1 and 3.2 for 2-5 meals. After setting all desired meals, press the setting button to save.
Cancel a Feeding Schedule: To cancel a specific feeding schedule (e.g., the third feeding), set its feeding portion to 0.

Maintenance Features

Troubleshooting (FAQs):

No response to pressing any button: After powering on, press and hold the lock button for 3 seconds to unlock the screen, then click the setting button to enter setting mode.
Food not distributed at the set time:
1. Ensure the food size is less than 12mm and only dry food is used.
2. Check if the food bowl is full or if there is food residue at the food outlet. Clean if necessary.
3. If the spotlights detect food residue at the food outlet, food will not be distributed.
4. Check if the turntable is jammed and clean it if necessary.
5. If battery-powered, ensure there is sufficient battery power.

For any problems, users are advised to send an email with their order number to support@wopet.com for assistance, with a response expected within 24 hours.