Worcester DT10RF Instruction Manual

Maintenance:
The Transmitter (Digistat Programmer or Optimising
Programmer) requires no maintenance.
The outer casing can be wiped clean using a dry
cloth. DO NOT use polish or detergents.
These units can not be serviced.
Should the existing unit fail to function correctly,
check:
Receiver times and program settings are correct
RF signal link is set up
Transmitter batteries are the correct type, fitted
correctly and are not exhausted.
Fit new batteries if in doubt.
DT10RF Receiver
Part Number: 8 716 106 667 0
DIGISTAT / DT10RF RECEIVER
MAINTENANCE
Digistat Programmer
Part number 8 716 114 461 0
DT10RF PROGRAMMER
INSTRUCTION MANUAL
8 716 115 493a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
31
8_716_115_493a 9/2/09 09:46 Page 35

Worcester DT10RF Specifications

General

Compatibility	Worcester Bosch Boilers
Display	LCD
Programming	7-day programmable
Mounting	Wall-mounted
Wireless	Yes
RF Frequency	868 MHz
Accuracy	±0.5°C
Type	Digital
Power Source	Battery
Communication	Radio Frequency