Setting the date:
1. Press the set? button until SET and DATE? are
displayed.
2. Press the OK button once, the year flashes on
the display.
3. Press + or - to set the correct year, e.g. 07.
4. When the correct year has been chosen, press
set? to select, now the month will flash.
5. Press + or - to select the correct month, e.g. 08.
6. When the correct month has been chosen, press
set? to select, now the day will flash.
7. Press + or - to select the correct day, e.g. 16.
8. When the correct day has been chosen, press
set? to select, now dLS will be displayed and
ON will flash.
9. Press + or - to switch between ON or OFF.
If you choose ON then the clock will automatical-
ly adjust the time for Daylight saving. If you
choose OFF then the time will not change to
take account of the Daylight Saving time change
twice a year.
10. Press set? twice to return to the normal
display.
NOTE: dLS = Day Light Savings time
DT20RF RECEIVER
PROGRAMMABLE SETTINGS
DT20RF PROGRAMMER
INSTRUCTION MANUAL
8 716 115 495a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
19
To Next Page
Loading...
Need help?
General