2. If you want to set a new setpoint, just rotate the
dial until your required setpoint is shown on the
display. After a couple of seconds the display will
change to show the current room temperature as
shown.
To change the user adjustable settings
1. To enter the User menu, press and hold the Set
button for more than 5 but less than 10 seconds
the display will show Pr (Preset temperature
setting) as shown.
2. If the dial is turned clockwise one click then HI
(Maximum temperature setting) will be displayed.
3. If turned one more click clockwise then Lo
(Minimum temperature setting) will be displayed.
NOTE: When adjusting the settings within the menu,
if the maximum or minimum possible setting are
reached, the display will flash to indicate you cannot
adjust the product further, e.g. you cannot set the
Preset higher than the maximum temperature setting.
To return to normal operation, either press the Set
button for more than 5 seconds or wait for 1
minute and it will return automatically.
To Next Page
Loading...
Need help?
General