To Next PageTo Next Page
Need help?Do you have a question about the Worcester Greenstar 24Ri and is the answer not in the manual?
General| Model | Greenstar 24Ri |
|---|---|
| Category | Boiler |
| Output | 24 kW |
| Fuel Type | Natural Gas |
| Boiler Type | Regular |
| Mounting | Wall-mounted |
| ERP Rating | A |
| Warranty | 5 years |
| Efficiency Rating | A |
| Flue Options | Horizontal or vertical |
Safety warnings and procedures for gas leaks and general safety.
Compliance with UK/IE regulations, British Standards, and specific building types.
Precautions regarding materials, modifications, and servicing advice.
Standard package contents and key boiler specifications.
Detailed technical specifications for different boiler models and fuels.
Diagram and list of internal and external boiler components.
Procedure for flushing and cleaning heating systems before boiler installation.
Electrical supply requirements and gas supply considerations for installation.
Guidelines for connecting pipework, valves, and system types.
Requirements and methods for routing condensate drainage pipes.
Minimum clearances for installation and servicing, including ventilation.
Details on connecting heating system and gas pipes to the manifold.
Various flue configurations and maximum total flue lengths for different models.
Guidelines for flue terminal placement and clearances to avoid nuisance.
Instructions and precautions for safely unpacking the boiler and checking contents.
Steps for fixing the wall mounting plate and creating the flue opening.
Procedure for removing the boiler's outer casing for access.
How to connect gas and water pipes to the boiler.
Instructions for installing horizontal flue components and plume redirection.
Details on connecting condensate, gas, and water pipes.
Wiring instructions for connecting the boiler to mains supply and external controls.
Diagram showing electrical component locations and wiring terminals.
Initial checks before commissioning, including pipe and gas connections.
Steps for filling the heating system and venting air from the boiler.
Procedure for switching on the boiler and setting controls for initial operation.
Guidelines for system flushing, inhibitor addition, and water quality.
Verifying gas inlet pressure and setting the boiler to maximum output.
Final steps for commissioning, including handover and controls setup.
General guidance on routine inspection and servicing procedures.
Procedure for adjusting CO/CO2 settings for the SIT valve.
Procedure for adjusting CO/CO2 settings for the Dungs valve.
Instructions for removing casing and replacing sensors, thermostats, and components.
A list of common replacement parts with part numbers and GC numbers.
Procedure for converting the boiler to LPG, including code plugs.
Schematic diagram of the boiler's electrical connections and components.
Table listing common faults, their indications, and possible solutions.
Flowchart illustrating the boiler's operational sequence and protection systems.
