To Next PageTo Next PageWhat does it mean when my Worcester GREENSTAR 24 display shows flow temperature alternating with |Col1|Col2|Col3|?
When the display shows the flow temperature alternating with |Col1|Col2|Col3|, the appliance is operating for 15 minutes at the maximum rated output.
What does it mean when Worcester Boiler display shows flow temperature alternating with .?
If the display shows the flow temperature alternating with ., it means the appliance operates for 15 minutes at the minimum rated output.
General| Output | 24 kW |
|---|---|
| Central Heating Flow Temperature Range | 30 - 80 °C |
| Type | Combination boiler |
| Fuel Type | Natural Gas |
| Mounting | Wall-mounted |
Clarifies symbols used for warnings, notices, and general information.
Outlines essential safety rules for gas, boiler operation, and general handling.
Details key functionalities, technical specifications, and layout of the appliance.
Covers cleaning systems, electrical, gas, and water supply requirements before installation.
Specifies clearances, compartment suitability, and flue terminal positions.
Instructions for unpacking the boiler and preparing the wall for mounting.
Covers pre-plumbing connections, hanging, and flue system installation.
Details mains power connection, system requirements, and access to electrical connections.
Steps before commissioning, including checks, filling, and water treatment.
Covers starting the appliance, switching modes, and setting heating parameters.
Includes CO/combustion checks, finishing commissioning, and temperature settings.
Explains control panel layout, service functions, and adjusting values.
Procedures for checking gas supply pressure and flue system integrity.
Details common maintenance tasks like draining, cleaning heat exchangers, and component checks.
Explains how to interpret various display messages and special display codes.
Lists common faults displayed on the appliance and their corresponding solutions.
