To Next PageTo Next Page
Need help?Do you have a question about the Worcester GREENSTAR CDi CLASSIC 29CDi GC and is the answer not in the manual?
General| Model | GREENSTAR CDi CLASSIC 29CDi GC |
|---|---|
| Category | Boiler |
| Output | 29kW |
| Dimensions | 760mm x 440mm x 360mm |
| Weight | 42kg |
| Fuel | Natural Gas |
| Domestic Hot Water Flow Rate | 12.3 L/min |
| Flow Rate at 35°C | 12.3 L/min |
| Max. Working Pressure | 3 bar |
| Warranty | 5 years |
| Central Heating Flow Temperature Range | 30°C - 80°C |
| Type | Combination |
Explains warning symbols, signal words, and other important symbols used in the manual.
Provides crucial safety advice for gas leaks, boiler operation, and combustible materials.
Details restrictions on modifying the boiler and flue system, which may invalidate the guarantee.
Explains the importance of regular servicing by qualified engineers and using original spares.
Describes the Benchmark initiative for correct installation, commissioning, and servicing of heating systems.
Identifies and explains the function of each control on the boiler's front panel.
Provides step-by-step instructions for turning the boiler on and off.
Explains how to adjust the central heating temperature using the control knob.
Advises using external programmers/timers and room thermostats for central heating control.
Details how to set the desired domestic hot water temperature using the control knob.
Explains how the boiler's frost protection activates to prevent freezing.
Advises on measures for protecting external pipework from freezing.
Describes how to activate pre-heat mode for faster hot water delivery.
Explains how to activate the holiday setting to conserve energy when away.
Guides users on how to reset the boiler in case of a fault and what to do if it persists.
Provides step-by-step instructions with diagrams on how to re-pressurise the heating system.
A table listing common problems, their causes, and recommended remedies for troubleshooting.
Lists error codes displayed by the boiler and their potential causes and recommended actions.
Provides guidance on thawing frozen condensate pipes and safety warnings.
Explains sealed systems, pressure, condensate discharge, and normal plume of vapour.
Describes pump anti-seizure, required clearances, and ventilation needs.
Provides contact information for technical support and advice on handling faults.
Covers efficient heating control, thermostat settings, and boiler operation for economy.
Highlights insulation, window upgrades, curtains, and draught exclusion for heat retention.
Explains how radiator performance is affected by external factors like curtains.
Provides information on registering the boiler guarantee online or by phone.
Prompts users to ensure the Benchmark Checklist is completed for their records.
Defines terms related to central heating, plumbing, condensate, thermostats, and valves.
Explains functions like pump over-run and pump anti-seizure.
Defines SED BUK as Seasonal Efficiency of Domestic Boilers in the UK.
