This tool is intended for lengthways and crossways cutting of wood with straight cuts as well as angle cuts to
45°; with the appropriate saw blades also non-ferrous metals, light building materials and plastics can be cut.
LpA=94,0 dB(A), KpA=3 dB(A)
Thickness of riving
knife
LpA=107,0 dB(A), KwA=3 dB(A)
Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Wear breathing protection
Risk of cuts!
Wear cut-resistant gloves
Important! Risk of injury. Never reach into the
running saw blade!
Electrical appliances must not be
disposed of with the domestic waste.
PRODUCT ELEMENTS (see fig. 1 &4)
Scope of delivery (see fig. 4)
General power tool safety warnings
WARNING: Read all safety warnings, instructions,
illustrations and technical data provided with this
power tool. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair and clothing away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection of dust
To Next Page
Loading...