• Slide the cross stop (7) into one of the grooves (31a/b) in the
1. Turn off the power tool before any transport and disconnect it from the power supply.
2. Apply the power tool at least with two people, do not touch the table extensions.
3. Protect the power tool from knocks, bumps and strong vibrations, such as during transport in vehicles.
4. Secure the power tool against overturning and sliding.
5. Never use the safety devices for handling or transporting purposes.
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off
use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
The machine requires no additional lubrication.
If a fault occur, e.g. after wear of a part, please contact your local dealer’s service.
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the packaging
materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted machines to your
local dealer. Here they will be disposed of in an environmentally safe way.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively
support us in conserving resources and protecting the environment by returning this appliance to the collection
centres (if available).
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in conformity with the following standards or standardized
documents: EN62841-1:2015, EN62841-3-1:2014/A11:2017, EN55014-1:2006/A2:2011; EN55014-1:2017; EN55014-
2:1997/A2:2008, EN55014-2:2015; EN61000-3-2:2014, EN61000-3-11:2000 ; in accordance with the regulations 2006/42/ЕEС,
2014/30/ЕEС.
NOISE/VIBRATION Measured in accordance with EN62841 the sound pressure level of this tool is <94 dB(A) and the sound
power level is <107dB(A) (standard deviation: 3 dB).
To Next Page
Loading...