Use high speed
and low pressure.
Sharpen Mower Blade
Belt Selection and Education:
P60 grit Zirconia Alumina belt from
Norton is designed and intended for
grinding tasks in metal.
NOTE: Never use this abrasive for
knife sharpening – it is too coarse.
n Best Techniques:
• Remember – Lefty Tighty / Righty Loosey on Hub Fastener.
• Keep tool and attachment clean for optimum life and performance.
• Avoid overheating tool.
- Allow tool to cool to room temperature between rated operating periods.
• Speed Setting: Use at full speed for optimum performance.
• Always secure work piece and wear eye protection when grinding.
Deburr Pipe
P60
Norton ZA
Grinding
Belt Information:
To Next Page
Loading...
