Why are my knives cutting into the edge guide on my Work Sharp Power Tool?
If your knives are cutting into the edge guide, it's likely due to excessive pressure. Apply much lighter pressure, ideally using only the weight of the blade for optimal results.
What to do if the tips of my knives are becoming rounded using a Work Sharp Power Tool?
If the tips of your knives are becoming rounded, ensure you stop sharpening while the blade’s tip is still supported by the belt. Also, keep the blade edge perpendicular to the belt.
How to feel for a burr at the cutting edge with Work Sharp Power Tool?
To feel for a burr at the cutting edge, slide your finger perpendicular and away from the cutting edge. The burr will feel like a small ‘ridge’ or ‘wire’ at the edge.
Read all safety warnings, instructions, illustrations, and specifications for safe operation.
Guidance on maintaining a clean, well-lit, and safe work environment free from hazards.
Instructions for safe electrical connections and precautions against shock.
Advises on staying alert, using PPE, preventing unintentional starts, and maintaining balance.
Guidelines on proper tool usage, maintenance, storage, and handling of cutting tools.
Details for obtaining service, contact information for Darex LLC, and disposal guidelines.
Key safety precautions for operating tools with abrasive belts, including PPE and proper handling.
Explanation of symbols found on the tool's label, such as Volt, Hertz, and current types.
Information on motor power requirements, intended uses, and prohibited applications.
Details the different grit belts included with the sharpener and their applications.
Instructions on how to rotate and position the sharpening cassette for different operations.
Solutions for common problems like tip rounding or blades cutting into the edge guide.
Recommended belt, angle guide, edge guide, and speed settings for kitchen knives.
First step for sharpening non-serrated kitchen knives, focusing on heel to tip technique.
Recommended settings for sharpening pocket, hunting, and filet knives.
Initial sharpening technique for outdoor knives, focusing on heel to tip across the belt.
Recommended settings for sharpening the flat side of serrated knife blades.
Technique for sharpening the flat side of serrated knives using the serrated guide.
Combining techniques for standard and serrated portions of knife blades.
Instructions for sharpening blades with deep concave curves using the purple 6000 belt.
Steps for sharpening the beveled and flat sides of single-bevel knives.
Recommended settings and technique for sharpening the beveled side of scissors.
Detailed steps for sharpening scissors using the guide slot and purple 6000 belt.
Instructions for grinding tools like shovels, hoes, and axes using the grinding position.
Technique for grinding the edges of various tools to restore sharpness.
Instructions for grinding bypass cutting tools like pruners and shears.
Technique for grinding the beveled blade of cutting tools for optimal sharpness.
Procedure for setting up and grinding lawn mower blades.
Steps for grinding both sides of a mower blade to ensure balance and sharpness.
Instructions for using the sharpener for general grinding, polishing, and deburring tasks.
Information on the 3-year warranty, online registration, and notes for sharpening.
Read all safety warnings, instructions, illustrations, and specifications for safe operation.
Guidance on maintaining a clean, well-lit, and safe work environment free from hazards.
Instructions for safe electrical connections and precautions against shock.
Advises on staying alert, using PPE, preventing unintentional starts, and maintaining balance.
Guidelines on proper tool usage, maintenance, storage, and handling of cutting tools.
Details for obtaining service, contact information for Darex LLC, and disposal guidelines.
Key safety precautions for operating tools with abrasive belts, including PPE and proper handling.
Explanation of symbols found on the tool's label, such as Volt, Hertz, and current types.
Information on motor power requirements, intended uses, and prohibited applications.
Details the different grit belts included with the sharpener and their applications.
Instructions on how to rotate and position the sharpening cassette for different operations.
Solutions for common problems like tip rounding or blades cutting into the edge guide.
Recommended belt, angle guide, edge guide, and speed settings for kitchen knives.
First step for sharpening non-serrated kitchen knives, focusing on heel to tip technique.
Recommended settings for sharpening pocket, hunting, and filet knives.
Initial sharpening technique for outdoor knives, focusing on heel to tip across the belt.
Recommended settings for sharpening the flat side of serrated knife blades.
Technique for sharpening the flat side of serrated knives using the serrated guide.
Combining techniques for standard and serrated portions of knife blades.
Instructions for sharpening blades with deep concave curves using the purple 6000 belt.
Steps for sharpening the beveled and flat sides of single-bevel knives.
Recommended settings and technique for sharpening the beveled side of scissors.
Detailed steps for sharpening scissors using the guide slot and purple 6000 belt.
Instructions for grinding tools like shovels, hoes, and axes using the grinding position.
Technique for grinding the edges of various tools to restore sharpness.
Instructions for grinding bypass cutting tools like pruners and shears.
Technique for grinding the beveled blade of cutting tools for optimal sharpness.
Procedure for setting up and grinding lawn mower blades.
Steps for grinding both sides of a mower blade to ensure balance and sharpness.
Instructions for using the sharpener for general grinding, polishing, and deburring tasks.
Information on the 3-year warranty, online registration, and notes for sharpening.
General| Brand | Work Sharp |
|---|---|
| Model | WSKTS2 |
| Category | Power Tool |
| Language | English |
To Next Page
