SETTING UP YOUR SHARPENER | 11
These engineered abrasives are long lasting and cool cutting.
Center belt on all three pulleys.
Turn tensioner ¼ turn counter-
clockwise to release. Spin belt by hand
to ensure properly centered on pulleys
before powering up. Return the Edge
Guide to the up position.
Push tensioner down and
rotate clockwise ¼ turn to
lock in place.
Flip Edge Guide down and out of
the way to make belt changes
easier. Snap into place.
2. INSTALL DESIRED BELT
PUSH + TWIST
The belt tracking screw (on back of
sharpener, with guide removed) can be
adjusted to correct belt tracking.
1.
3.
5.
2.
4.
To Next Page
Loading...
