SHARPENING EDGED TOOLS | 23
NOTE: Tools such as these do not require sharpening to a precise angle; just let
the belt conform to the edge of the tool. It will take longer to restore an edge to
severely damaged tools.
SHARPENING EDGED TOOLS
SET UP
Rotate Sharpening Cassette into
the Grinding position.
BELT ANGLE GUIDE EDGE GUIDE SPEED
GREEN P80 REMOVED* DOWN GRINDING (2)
SHOVELS, HOES, AXES, PICKAXES, POST-HOLE DIGGERS, &
OTHER EDGED TOOLS
STEP 1
Clamp tool to be sharpened securely
in bench vise.
STEP 2
Squeeze power switch; grind edge of
tool until you are satisfied with the
sharpness.
45°
* Pull up on the Angle Guide to remove from
the Sharpening Cassette.
To Next Page
Loading...
