22 | SHARPENING SCISSORS
SHARPEN ONLY THE BEVELED SIDE OF YOUR SCISSORS.
Marking the beveled side with a black marker will make it easier to see when the
cutting edge has been sharpened.
SHARPENING SCISSORS
SET UP
BELT ANGLE GUIDE EDGE GUIDE SPEED
PURPLE 6000 SCISSOR UP SHARPENING (1)
STEP 1
Place scissor blade in guide slot all the way
to the hinge. Keep the blade flat on the guide
while sharpening.
STEP 2
Pull scissors steadily through guide along
full length of blade.
STEP 3
Repeat STEP 1 about 5 times or until black
marker is sharpened off.
SCISSOR GUIDE
NOTE: Damaged or extremely dull scissors may
need the RED P220 Belt.
To Next Page
Loading...
