Work Sharp Ken Onion Edition - User Manual

WORKSHARPTOOLS.COM
KNIFE & TOOL SHARPENER
USER’S GUIDE
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
GCAUTION! To reduce the risk of injury, the user must read and understand this instruction manual before using product. Save
these instructions for future reference.
GWARNUNG: Um die Verletzungsgefahr zu verringern, muss der Benutzer dieses Handbuch gelesen und verstanden haben,
bevor er das Produkt einsetzt. Bewahren Sie die Gebrauchsanleitung für späteres Nachschlagen auf.
GATTENTION! Afin d’éviter tout risque de blessure, l’utilisateur doit lire et bien appréhender les consignes de ce mode d’emploi
avant l’utilisation de l’appareil. Conserver ce mode d’emploi durant toute la durée de vie de l’appareil.

Summary

Safety Information

General Power Tool Safety Warnings

Essential safety guidelines for operating power tools, covering general hazards and precautions.

Personal Safety and Tool Use

Recommendations for personal protective equipment, safe operation, and tool maintenance to prevent injuries.

Sharpening Basics

Getting To Know Your Tool

Sharpening Guide, Speed, and Belt Information

Setting Up Your Tool

Tool Setup and Cassette Removal Procedures

Step-by-step instructions for assembling, setting up, and removing the sharpening cassette.

Sharpening Reference Chart

Knife Sharpening Settings and Best Practices

Sharpening Outdoor Knives

Blade Placement and Edge Guide Use

Instructions on how to position the blade and effectively use the edge guide for outdoor knives.

Repeating Strokes and Avoiding Tip Rounding

Guidance on repeating sharpening strokes and techniques to prevent rounding the knife tip.

Sharpen Serrated Knives

Sharpening Flat Side with 6000 Grit Belt

Sharpening Gut Hooks

Using 6000 Grit Belt on Downhill Side

Sharpening Kitchen Knives

Using the Edge Guide and Blade Placement

Details on using the edge guide and correctly placing kitchen knives for sharpening.

Powering On and Pulling the Knife

Sharpening Scissors

Sharpening the Beveled Side with X22 Belt

Grinding, Polishing, Deburring

Preparing the Tool for Grinding Tasks

Using P120 Belt and Best Techniques

Tool Grinding Attachment

Installing the Pulley Hub and Attachment

Instructions for attaching the drive hub and the tool grinding attachment to the sharpener.

Belt Installation and Operation

Covers belt installation, tracking, sharpening mower blades, deburring pipes, and belt selection.

Blade Grinding Attachment

Belt Information and Attachment Installation

Blade Grinding Process and Best Techniques

Outlines the steps for blade grinding, including angle selection, belt movement, and optimal techniques.

Troubleshooting

Common Sharpening Issues and Solutions

Addresses common problems like dullness, tip rounding, and belt issues with practical solutions.

Best Techniques for Troubleshooting

Work Sharp Ken Onion Edition Specifications

General

Voltage	120V
Angle Guide	Adjustable
Belt Size	3/4" x 12"
Power Source	Electric
Abrasive Grit	6000
Angle Guides	15° to 30°
Motor Speed	Variable (1200-2800 SFM)
Belt Grit Options	6000
Speed	Variable