20 | SHARPENING GUT HOOKS
SHARPENING GUT HOOKS
& BLADES WITH DEEP CONCAVE CURVES
STEP 1
Place curve of gut hook over the belt on
downhill side; allow belt to conform to blade’s
curve.
NOTE: Only use the downhill / right side of the
belt or you will cut the belt.
Squeeze power switch; hone 2 to 4 seconds.
STEP 2
Repeat STEP 1 on other side of gut hook.
SET UP
BELT ANGLE GUIDE EDGE GUIDE SPEED
PURPLE 6000 REMOVED* DOWN SHARPENING (1)
NOTE: Follow instructions SHARPENING OUTDOOR KNIVES on the standard portion of
the blade using the Angle Guide set at 25°.
* Pull up on the Angle Guide to remove from the Sharpening Cassette.
To Next Page
Loading...
