Work Sharp KNIFE & TOOL SHARPENER - Page 14

14 Work Sharp Knife & Tool Sharpener
Top View
SHARPEN RE-SHARPEN
P220
RED
6000
PURPLE
P220
RED
6000
PURPLE
×
10
×
10
×
2
×
10
Step 3
Repeat
Step 2 now
using the left
side of guide.
Repeat steps 2 and 3 for 5 strokes
per side (10 total strokes).
Step 4
Your knife should now be rope-cutting sharp.
If you choose, you can proceed with the
purple 6000
grit belt
and hone the edge for even sharper results!
Belt: 6000 PURPLE
Remove red belt, install purple belt. Hone knife.
Repeat Steps 2 & 3 alternating evenly until knife is
honed (5 strokes per side, 10 total strokes).
NOTE: When re-sharpening, use the red belt for 1 to 2 strokes
per side, then the
purple belt for 5 honing strokes per side.