User’s Guide 9
Step 2
Install desired belt.
BELT SELECTION GUIDE
Coarse P80 GREEN for grinding and sharpening most tools
Medium P220 RED for knife & scissor sharpening
Fine
6000 PURPLE for honing knives
Push tensioner down
and make ¼ turn to the
right to lock in place.
Center belt on all
three pulleys.
Turn tensioner
¼ turn to the
left to release.
NOTE: Use red knob on
sharpening cassette to adjust
belt tracking. Belt must be
centered on all 3 pulleys.
These engineered abrasives are long lasting and should meet
your sharpening needs. They will last longer than you think.
Abrasive belts available at
www.worksharptools.com
To Next Page
Loading...
