Danger!
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or
small parts. There is a danger of swallowing or
suffocating!
3. PROPER USE
The cordless stapler is designed for stapling and
fastening textiles, leather and wood with the
appropriate staples. The cordless stapler is designed
for temporary operation. If operated continuously, the
stapler will become hot and the increasing heat will
reduce its performance. When hot, interrupt your
work and allow the cordless stapler to cool.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. TECHNICAL DATA
Power supply ................................................ 3.6 V DC
Battery capacity .................................................2.0 Ah
Battery type ............................................... Lithium-ion
Weight ................................................................1.1 kg
Charger for the product
Battery charge voltage ..................................... 5 V DC
Battery charge current ............................................1 A
Charging unit
supply voltag............................... 100-240V~ 50/60 Hz
Charging time ...................................................2 hours
2.
LAYOUT AND ITEMS SUPPLIED
2.1 Layout (Fig. 1)
1. ON/OFF Switch
2. Charge port
3. Trigger
4. Battery status indicator
5. Air vents
6. Contact safety
7. Staple exit
8. Quick release magazine
9. Charger
2.2 Items supplied
CARTON CONTENTS (Fig. 1)
Cordless Electric Stapler
Charger
Original safety and operating instructions
Please check that the article is complete as specified
in the scope of delivery. If parts are missing, please
contact our service center.
Open the packaging and take out the equipment
with care.
Remove the packaging material and any packaging
and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until the end
of the guarantee period.
GB
8
After the battery has reached the end of its useful
life, we recommend recycling the materials at your
local municipal council recycling centre. DO NOT
attempt to replace the battery cells in the battery
pack, repair or modify any part of the battery pack
assembly.
When recycling, make it nonconductive by
applying insulating tape to the terminals located on
the battery.
WHEN TO CHARGE THE BATTERY
New batteries are shipped in a low charged
condition and should be fully charged before Use.
The battery pack can be recharged at any time
during use, provided the pack is not overheated.
If the battery pack starts to cut out due to low
voltage, or previous tasks undertaken can no
longer be performed, it is suggested to stop using
the tool and recharge the battery.
For storage, it is suggested to recharge the battery
between 50% and 75% charge.
To Next Page
Loading...
