EasyManuals Logo

Workshop WS1200VA User Manual

Workshop WS1200VA
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
Casters
If your Casters are noisy, you may put a
drop of oil on the Roller Shaft to make
them quieter.
Cord Maintenance
When vacuuming is complete, unplug the
Cord and wrap it around the Powerhead
Assembly. If the Power Cord is damaged,
it must be replaced by the manufacturer
to reduce the risk of accident.
Cord Storage
Simply, wrap the Power Cord around
the Powerhead Assembly and snap the
connector on the plug to a wrap of
the Cord.
Storage
Before storing your Vac, the Drum should
be emptied and cleaned. The Cord
should be wrapped around the unit and
the Hose should be stored as described
in this manual. Accessories should be
kept in the same area as the Vac so they
can be readily available. The Vac should
be stored indoors.
MAINTENANCE (continued)
WARNING: To assure product
SAFETY and RELIABILITY, any other
maintenance, repairs and adjustments
should be performed by Authorized
Service Centers, always using
WORKSHOP replacement parts.
!
WARNING
SERVICING OF DOUBLE-INSULATED WET/DRY VAC
In a double-insulated Wet/Dry Vac, two systems of insulation are provided
instead of grounding. No grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added. Servicing a double-
insulated Wet/Dry Vac requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts
for a double-insulated Wet/Dry Vac must be identical to the parts they replace.
Your double-insulated Wet/Dry Vac is marked with the words "DOUBLE
INSULATED" and the symbol (square within a square) may also be
marked on the appliance.
To reduce the risk of injury from electrical shock, unplug power cord before
servicing the electrical parts of the Wet/Dry Vac.
!
!
WARNING: To reduce the risk of injury from electrical shock, unplug power
cord before servicing the electrical parts of the Wet/Dry Vac.
!
WARNING: All disassembly and repairs should be performed by qualified
personnel.
SP6820-2 Workshop 2018.qxp_WS1200VA0 WS1600VA0 7/20/18 1:56 PM Page 14

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Workshop WS1200VA and is the answer not in the manual?

Workshop WS1200VA Specifications

General IconGeneral
BrandWorkshop
ModelWS1200VA
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals