3600W Digital Inverter with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. INF3800A-1 • 03/2018 • 59905
(toll free)
AFTER SALES SUPPORT
(toll free)
3600W Digital Inverter with Pure Sine Wave
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. INF3800A-1 • 03/2018 • 59905
24 25
7. You can now one at a time, physically plug in your appliances to the
available outlets . Ensure when plugged in the appliances are OFF and not
requiring power.
Ensure you have read the appliances manual for operation action to ensure
the appliance doesn’t accidentally power on when turning on the power to
the appliance (Fig X).
8. Switches 1 and 2 shown in Fig R control the ow of power to the
available outlets.
The 240Va.c Outlet 1&2 Power On/O switch (1) controls outlet
1 and outlet 2.
The 240Va.c Outlet 3 Power On/O switch (2) controls outlet 3.
4. Press the engine On/O switch (4) to the “ON” green position as indicated
byan “I” down (Fig. U). This generator will not start without this switch in
the ON position.
5. To start the engine, slowly pull the recoil starter (18) until you feel it
engage and then pull it briskly (Fig. V). When starting the engine for the
very rst time, it may require a number of attempts to start until the fuel
has travelled from the tank to the engine. Slowly pull the recoil starter (18)
to full extent 2 or 3 times to assist an enriched fuel mixture to enter the
carburettor.
6. Once the engine starts, move the choke lever (19).backwards slowly
(towards the rear of the generator) to the “RUN” position (Fig T).
This ensures smooth operation when under load.
Allow the generator to run for a moment unloaded to warm up before
connecting appliances to be powered are connected.
The LED power supply indicator (9) is now showing green and the unit is
ready to provide power to the outlets (Fig W).
Starting/Stopping the Engine Starting/Stopping the Engine
W.
X.
V.U.
ON
OFF
1
2
Y.
(Shading in image above shows which switch controls which outlet)