To Next PageTo Next Page
Need help?Do you have a question about the Workzone PGM6003 and is the answer not in the manual?
Explains symbols used in the manual, including safety warnings and directives.
Provides essential safety guidelines for operating the generator, focusing on personal safety and environmental conditions.
Outlines critical safety precautions related to electrical operation, wet conditions, and proper connections.
Details risks associated with the generator's hot exhaust and flammable fuel, emphasizing safe handling.
Identifies key components of the generator, including fuel tank, sockets, switches, and starter.
Shows the correct spark plug gap measurement (0.70-0.80 mm) for optimal performance.
Illustrates the operation of ON/OFF switches and valve positions.
Illustrates the correct polarity for connecting a battery for charging using the DC output.
Lists part numbers with their corresponding descriptions for ordering and replacement.
Provides a detailed exploded view of the generator, showing all parts in relation to each other.
Explains the generator's ground terminal connection and advises consulting an electrician for local codes.
Details the steps for assembling the generator, including attaching the tank cover and carry handle.
Provides the correct fuel mixture ratio and quantities for 2-stroke oil and petrol.
Lists essential precautions for safely filling the fuel tank, including using the correct mixture and avoiding overfilling.
Step-by-step guide on how to start the generator, including choke and starter cord operation.
Instructions on how to use the generator's AC output for powering appliances.
Steps for safely shutting down the generator, including turning off the switch and fuel tap.
Guidance on connecting a battery for charging using the generator's DC output.
Outlines daily checks and checks required every 3 months or 50 hours of operation.
Specifies maintenance tasks for 6-month/100-hr and 12-month/300-hr intervals.
Instructions for inspecting, gapping, and cleaning the spark plug, including torque specifications.
Describes how to clean or replace the exhaust screen to prevent blockages.
Instructions for cleaning the air filter element, including washing in solvent and re-oiling.
Explains how to remove, clean, and replace the fuel tap filter.
Provides guidance on cleaning the generator's housing and removing stubborn dirt.
Details procedures for preparing the generator for long-term storage, including draining fluids and oiling the cylinder.
Advises on fault reporting and environmental considerations for disposal.
Lists fundamental checks to perform if the generator is not functioning correctly.
Provides troubleshooting steps for engine starting issues, covering spark plug, ignition, and compression.
Lists detailed technical specifications of the generator, including voltage, power, dimensions, and engine type.
Details all items included in the generator's packaging, such as the generator, handle, and manuals.
Section for the user to fill in personal and purchase information for warranty registration.
Area for the user to describe any issues or malfunctions experienced with the product.
Provides the address for returning the completed warranty card and contact details.
Lists contact information and website for after-sales support and service.
General