20
20
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
BL20AL • 8213 • 06/2019
8.9 Automatic spindle lock (See Fig. H)
The automatic spindle lock allows you to use the drill / driver as a regular
screwdriver. You can give an extra twist to firmly tighten a screw, loosen
a very tight screw or continue working when the battery energy has
expired. For manual screwdriver purposes, the chuck is automatically
locked when the drill is off.
8.10 Using the LED light (12)
To turn on the LED light (12), first activate the drill / driver, then press
either the reverse touch pad (10) or the forward touch pad (11). LED
lighting (12) increases visibility-great for dark or enclosed areas.
When you release either the reverse touch pad (10) or the forward touch
pad (11), the LED light (12) will de-activate after 5 seconds.
8.11 Belt clip (6) (See Fig. I1, I2)
WARNING:
To reduce the risk of serious personal injury,
ensure the screw holding the belt clip (6) is secure.
The side belt clip (6) is used to assist to clip the drill / driver to your waist
belt while working. To install, insert the assembly screw through the belt
clip screw hole into the retaining hole on the drill / driver, and using a
philips head screwdriver (not supplied), tighten the screw by turning in a
clockwise direction
NOTE: The belt clip (6) can be assembled onto either side of the drill /
driver.
H
To Next Page
Loading...
