What to do if my Workzone WZ-TB 13 L Drill cannot be switched on?
If your Workzone Drill won't switch on, first ensure the mains plug is fully inserted into a working socket. Also, check that the protective hood is properly closed and securely locked in place.
Why does the Workzone WZ-TB 13 L Drill bit hardly penetrate the workpiece?
If the Workzone Drill bit barely penetrates the clamped workpiece, it could be due to an unsuitable or worn drill bit. Ensure you're using the correct type and that it's in good condition. Another reason might be an incorrect speed setting; adjust the speed to the appropriate level for the material you're drilling.
Details on the intended use of the drill and prohibited applications for safe operation.
Identifies potential inherent risks even when the drill is used correctly.
Guidelines for maintaining a safe working environment around the power tool.
Instructions to ensure safe electrical connection and operation of the power tool.
Precautions for personal safety, including awareness and protective gear.
Instructions on how to correctly use and handle the power tool for safe operation.
Specific safety instructions and precautions when using the drill function.
Explanation of the emergency stop switch function and its proper use.
Instructions on how to adjust the drill speed using the V-belt system.
Instructions for securely clamping the workpiece using the included vice.
Procedure for setting the desired drilling depth using the scale ring.
To Next Page
General
